Brand Name: NONE
Certification: CE
For Vehicle Type: Airplanes
Four-wheel Drive Attributes: Assemblage
High-concerned chemical: None
Is Batteries Included: No
Is Electric: No Battery
Is it battery/power supply: N
Is it charger/adapter: N
Material: Composite Material
Model Number: Matek F405-HDTE Flight Controller
Origin: Mainland China
Quantity: 1 pcs
RC Parts & Accs: F405-HDTE
Recommend Age: 14+y
Remote Control Peripherals/Devices: Remote Controller
Size: 44*29*12.7mm
Technical parameters: KV1100
Tool Supplies: Assembly Category
Upgrade Parts/Accessories: F4 Flight Controller
Use: Vehicles & Remote Control Toys
Wheelbase: Bottom Plate
STM32F405 has 1MB flash which can run ArduPilot/INAV/BetaFlight
InvenSense the 3rd generation IMU ICM42688-P
9-60V(3~12S LiPo) wide input voltage and voltage sense. and a 9~16V BEC for DJI OSD or analog VTX.
8motors+3servos in INAV/BF multirotor mixer.
2x SH1.0_8pin connector for PnP with 2x 4in1 ESC
1x SH1.0_6pin connector for PnP with HD System(Caddx Vista & Air Unit)
USB pin breakout for connecting to external USB adapter.
MCU: STM32F405RGT6
IMU: ICM42688-P
OSD: AT7456E, DJI OSD
Baro: SPL06-001 (I2C)
Blackbox: 16M-byte Flash memory
6x UARTs, 1x Softserial_Tx option
12x PWM outputs (8x Dshot)
1x I2C
4x ADC (VBAT, Current, RSSI, Airspeed)
2x PINIO
2x SH1.0_8pin connector for 4in1 ESC
1x SH1.0_6pin connector for HD System(Caddx Vista & Air Unit)
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
9~16V(Vxs) output ON/OFF switchable
Dual analog camera signal switchable
Input: 9~60V (3~12S LiPo)
BEC: 5V 1.5A
BEC: Vx, 9~16V/1~2A (3S IN/9V 2A, 4S IN/12V 2A, 6S IN/16V 2A, 8S IN/16V 1.5A, 12S IN/16V 1A)
Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)
No Current Sensor built-in, supports external current sensor of PDB/4in1
ArduPilot: MatekF405-TE
INAV: MATEKF405TE
BetaFlight: MATEKF405TE
Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
Dimensions: 36 x 36 x 9 mm
Weight: 7g
1x FC F405-HDTE
6x Silicon grommets M4 to M3
1x SH1.0_8pin cable 5cm, 2x SH1.0_8pin connectors
1x SH1.0_6pin to GH1.25_8pin cable for DJI Air Unit (replaced by black SH1.0-6pin to black SH1.0-6pin 12cm cable since Aug 01, 2023)
Due to high demand, orders may take 2-3 Days to arrive
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.
Our New Products are arriving soon! Enter the TEI club to stay updated on promotions, product updates and much more!